Conval, Inc.
CONVAL INC.
96 Phoenix Avenue,
Enfield, CT 06082-4408 USA
Phone: 860.749.0761
Fax: 860.763.3557
Email: sales@conval.com
Website: www.conval.com
Print Back
Pressure Class
Full ASME rated through 3045. Higher intermediate and limited class ratings are available. Consult factory.
Unit of Measure

Specifications

Brands

 N/A Conval

Nominal/Intermediate ASME Pressure Class Ratings

 N/A 900

Intermediate Pressure Class Ratings

 N/A 1195

Size Code

 N/A 7G

Pipe Size

 N/A 1 in25 mm
Weight1 N/A 26 lb12 kg

Dimensions

A

 N/A 2 3/4 in70 mm

B

 N/A 4 1/4 in108 mm

C

 N/A 3 1/4 in83 mm

D

 N/A 14 9/16 in370 mm

E

 N/A 12 in305 mm

Flow Specification

Standard Orifice Size

 N/A 1/8 in3/16 in1/4 in5/16 in3/8 in7/16 in1/2 in9/16 in3.2 mm4.8 mm6.4 mm7.9 mm9.5 mm11.1 mm12.7 mm14.3 mm

Flow (Cv) for 1/8 Inch (in) Standard Orifice Size

 N/A 0.5

Flow (Kv) for 1/8 Inch (in) Standard Orifice Size

 N/A 0.4

Flow (Cv) for 3/16 Inch (in) Standard Orifice Size

 N/A 1.1

Flow (Kv) for 3/16 Inch (in) Standard Orifice Size

 N/A 1.0

Flow (Cv) for 1/4 Inch (in) Standard Orifice Size

 N/A 2.1

Flow (Kv) for 1/4 Inch (in) Standard Orifice Size

 N/A 1.8

Flow (Cv) for 5/16 Inch (in) Standard Orifice Size

 N/A 3

Flow (Kv) for 5/16 Inch (in) Standard Orifice Size

 N/A 3

Flow (Cv) for 3/8 Inch (in) Standard Orifice Size

 N/A 5

Flow (Kv) for 3/8 Inch (in) Standard Orifice Size

 N/A 4

Flow (Cv) for 7/16 Inch (in) Standard Orifice Size

 N/A 7

Flow (Kv) for 7/16 Inch (in) Standard Orifice Size

 N/A 6

Flow (Cv) for 1/2 Inch (in) Standard Orifice Size

 N/A 9

Flow (Kv) for 1/2 Inch (in) Standard Orifice Size

 N/A 8

Flow (Cv) for 9/16 Inch (in) Standard Orifice Size

 N/A 11

Flow (Kv) for 9/16 Inch (in) Standard Orifice Size

 N/A 10

Features

Features

 N/A
  • Replaceable 440C SS Seat/Venturi
  • Low Velocity Across the Main Seat
  • Precise Flow Control
  • Position Indicator
  • Pressure Seal Bonnet
  • Superior Control Micrometer Dial
  • Ease of Actuation
    • Air
    • Motor
    • Hydraulic

Note

Note

 N/A
  1. Use "U" as the valve design modifier in the figure number. (e.g. 1.50-13U2J-F22)
  2. Indicate orifice size or inlet pressure and temperature and required maximum flow.
Other materials available upon request.
Butt Weld dimensions determined by pipe schedule.
  • 1 All weights are approximate for shipping purposes only.